La maggior parte dei popolari creativo ultime elettrico a tre rulli di legno debarked

FOB Prezzo di riferimento:Ottieni l'ultimo prezzo
30,00 USD - 100.000,00 USD / Insieme | 1 Insieme/insiemi Elettrico a tre rulli di legno debarked (Ordine minimo)
rapporto di Attività Sospette
Panoramica
Dettagli in breve
Circostanza:
Nuovo
Velocità dell'alberino:
48 m/min
Gamma di legno del diametro:
20-600 millimetri
Tasso della sbucciatura:
98%
Tasso di legno di perdita:
Under1.5 %
Gamma di legno di lunghezza:
1400 millimetri
Punto d'origine:
Henan, China
Marca:
DAHENG
Numero del Modello:
Legno debarker
Tensione:
380 V
Potere (W):
11kw
Dimensione (L*W*H):
8000*1400*1700 millimetri
Peso:
3-4 t
Certificazione:
CE ISO
Nome:
Elettrico a tre rulli di legno debarked
Altro nome:
La maggior parte dei popolari creativo elettrico a tre rulli di legno debarked
Tipo:
Legno debarker peeling
Materie prime:
Tutti i tipi di albero di legno log
Applicazione:
Qualsiasi dimensione di legno
Uso:
Log legno ramo di un albero debarker peeling
Articolo:
Log legno ramo di un albero debarker peeling
Adatto per:
Tutto il mercato
Pezzi di ricambio:
No
Capacità:
10 t/h
Servizio After-sales fornito:
Costruisce disponibile per assistere il macchinario oltremare
Capacità di fornitura
Capacità di fornitura:
10000 Set/Sets per Month electric three roller wood debarked
Confezionamento & Consegna
Pacchetto
Elettrico a tre rulli di legno debarked pacchetto: un pacchetto per un set di legno di legno peeling macchina
Un 40 contenitore per un set grande modello
Orificio
qingdao shanghai tianjin all china port

Most popular creative latest electric three roller wood debarked

 

Product Description

 Introduction of electric three roller wood debarked:

Wood debarker Peeling machine is the most advanced products with the best technical properties, which is used to remove skin before rotary cutting in spineless veneer lathe. It applies to different diameters of willow, aspen, elm log and branch 

peeling without timber harm. Wood skin Peeling machine has the high speed peeling, low rate damage of wood and high ability of knot skip, which becomes the best helper of material saving and cost reducing.

 

 

 

Drum wood peeling machine (wood paring machine) has fast speed, peeling clean, the machine is operated easily,the efficency is about three times than artificial . Especially the strong adaption to irregular shape brushwood. Water is unnecessary for peeling processing, no pollution and pollution. Sturdy construction, easy to operate, repair and maintain.Drum wood peeling machine (wood paring machine) can remove the skin and rot of poplar, pine wood, wood branches, etc. Applicable to 2-40 cm diameter lumber, wood slice.

 

Drum wood debarker

capacity

Wood log size

Weight

Power

Rotary speed

DHBP-1

6 T/H

2.5*1.4M

1.8T

5.5kw

30(r/min)

DHBP-3000-I

7.2 T/H

3.0*1.6 M

2.4 T

7.5kw

27(r/min)

DHBP-3000-II

9.5 T/H

3.0*1.9 M

3.2 T

7.5kw

25(r/min)

DHBP-3000-III

11 T/H

3.0*2.2 M

4.5 T

11kw

22(r/min)

 

 

 

 

 

 

 

 

 

 

The machine can peel wood, also known as wood peeling machine, belonging to one of wood working machinery products.
a. Using four-edge knife, easy to use and low cost.
b. Knife plate voltage controlled by the hydraulic control, advanced structure, reliable performance.
c. Feed part adopt stepless speed. It has good peeling effect on the cold wood, curved wood, eucalyptus, oak, elm and other tree species has a good hard.
d. Peeling the net high productivity, little injury for the wood .

 

Model No.SLWD-150SLWD-220SLWD-300SLWD-400
Max. diameter150mm220mm300mm400mm
Knife quantity4 pieces4 pieces4 pieces4 pieces
Main power4kw4kw5.5kw6kw
Driving motor1.5kw1.5kw1.5kw1.5kw

 

 

 

1 This machine is the rotor teeth with stripping produced a unique force, so that wood in the hopper tank plate section of a recurring cycle of movement, but also around its own axis to do wood turning motion segment and irregular beating. To this paragraph with wooden teeth, wood and wood paragraph paragraph paragraph wood and keep the friction between the storage tank, impact, compression, fast bark are separated, to achieve effective peeling effect.

 

2 One end to put in and the other for outlet , it’s better than the rotary one  which have to stop the motor to take the peeled trees out.

 

3 Can suit for many kinds of different trees , especially for the bend one  have more high peeling rate than the traditional rotary type.

 

4 The machine is fixed when working , so the power consumption and the failure rate  is small and with low noise.

 

Model  DH-ADH-BDH-C
Motor  11kw /22HP Diesel15kw / 38 Diesel 22kw / 55 HPDiesel 
Capacity  8-9t/h10-12t/h 12-15t/h
Debarking rate  >95%>95%>95%
Suitable length of wood 6m8.3 m9m
Suitable wood diameter 20-500mm 20-600mm20-700mm
Machine weight  3.8T5.2 T6.5T
Machine size  8000*1400*1700mm9300*1400*1700mm11*1.6*2m
Worker needed  1-2 persons 1-2 persons1-2 persons
Belt size Length 16m18m22m
 Width 600mm600mm600mm

 

 

1. The wood bark stripper adopts open silo --wood stripper machine--wood is feeded from one side amd discharged from the other side.
2. Due to the impact of gear teeth on wood, wood in the casing not only do circulating movement, but turn around their own aix, so stripping efficiency is high. Species of difficult stripping trees such as eucalyptus wood and poplar can be peeled off with high rate.

 

Veneer peeling machine 
Models4 feet
Max peeling length1300mm
Max cutting diameter500mm
Thickness range0.6-3.6mm
Arc length of rotary knife (mm)polysius29-31; peal polishing34-36
Rotary knife specification (LxWxT):1400x130x12.7 mm
Core diameter of remaining28mm
Total power21.5KW
Capacity7.5CBM/Hour(2 mm of the thickness)
Roller diameter125Cross roller
Weight4.0T
Overall dimension3200*1600*1380mm

 

Packing and Sending Picture 

Packaging & Shipping

 Pre-sale:

1. Suggest to client suitable raw material, final product capacity.

2. Introduce machine's structure and features in detail, explain the price component.

3. answer client concerned questions.

 

 After-sale:

1. Start production as soon as receiving down payment.

2. Send photos of machine in manufacturing and finished photos to client, for your better learn about the machine's condition.

3. Delivery machine in time, taking photos during loading, so you can "remote monitoring" your goods.

4. Documents and certificate available in time.

5. Manual documents available. Engineer can be sent to client site for installation instruction.

Company Information

 

electric three roller wood debarked

Potrebbe interessarti
Non è proprio quello che cerchi? 1 richiesta, più preventivi Ottieni i preventivi ora >>
Potrebbe interessarti
I risultati di questi Prodotti o Fornitori vengono tradotti per la tua convenienza usando i strumenti della lingua. Se hai qualche consiglio su questa pagina, ti preghiamo di aiutarci a migliorare.
All product and supplier information in the language(s) other than English displaying on this page are information of www.alibaba.com translated by the language-translation tool automatically. If you have any query or suggestion about the quality of the auto-translation, please email us at (email address). Alibaba.com and its affiliates hereby expressly disclaim any warranty, express or implied, and liability whatsoever for any loss howsoever arising from or in reliance upon any auto-translated information or caused by any technical error of the language-translation tool.