notice Attenzione: Si prega di prestare attenzione e controllare col proprio fornitore se il prodotto è destinato alla protezione contro il virus e se il coronavirus (COVID-19) può influenzare l'ordine. close

Generatore diesel regolatore elettronico di controllo Esd5500e regolatore di velocità

  • 1-4 parti
    39,00 USD
  • 5-9 parti
    37,00 USD
  • 10-29 parti
    35,00 USD
  • >=30 parti
    33,00 USD
Numero del Modello:
- +
0pezziselezionati, US $in totale
Visualizza dettagli
Spese di spedizione
Conferma la quantità delle merci.
Tempi di consegna:
7 giorni dopo la ricezione del pagamento
Logo personalizzato (Min. ordine: 500 parti)
Imballaggio su misura (Min. ordine: 500 parti)


Grafici di personalizzazione (Min. ordine: 500 parti) Meno
Contatta il fornitore
rapporto di Attività Sospette
Dettagli in breve
Punto d'origine:
Guangdong, China
Generatore brushless
14.5*14*2.7 centimetri
Polarità di ingresso:
Negativo A Terra (Caso Isolato)
Ambientale Umidità Relativa:
Fino a 95%
Affidabilità Test:
100% funzionalmente Testato
Affidabilità di Vibrazione:
1G a 20 a 100Hz.
Prestazioni Droop Range:
1-5% regolazione
Ingresso Segnale del Sensore di Velocità:
0.5-120 volt RMS

Confezionamento & Consegna

Unità di vendita:
Articolo singolo
Dimensioni della confezione singola: 
19.3X18X6.3 cm
Peso loro per unità:
0.620 kg
Tipo di confezione:
Scatola standard, formato di imballaggio: 18x17.5x5.5cm, formato della scatola: 52x38x42CM, 35 ~ 40PCS/carton
Esempio di immagine:
Tempi di consegna: :
Quantità(parti) 1 - 30 >30
Tempo previsto (giorni) 7 Da negoziare
Product Description
Diesel engine speed governor esd5500e.
Speed Control unit ESD5500E.
it is an all electronic device designed to control engine speed with fast and precise response to transient load changes.this
dosed loop control,when connected to a proportional electric actuator&supplied with a magnetic speed sensor signal,will control a
wide variety of engines in an isochronous or droop mode.produced with high quality components ,It solves the problem of black
smoke from the generator when it is started.5500E designed for reliability and built ruggedly to withstand the engine environment.
Simplicity of installation and adjustment was foremost in the design. Non-interacting performance controls allow near opti- mum response to be easily obtained.
The primary features of the ESC5500E Series speed control unit are the engine STARTING FUEL and SPEED RAMPING adjustments. The use of these features will minimize engine exhaust smoke experienced prior to attaining engine operat- ing speed. A summing circuit receives the speed sensor signal along with the speed adjust set point input. The speed range has a ratio of 8:1 and is adjusted with a 25 turn potentiometer. The output from the summing circuit is the input to the dynamic control section of the speed control unit. The speed control unit circuit is influenced by the gain and stability performance adjustments. The governor system sen- sitivity is increased with clockwise rotation of the gain adjust- ment. ADJUSTMENTS B.Rotate the STABILITY adjustment clockwise until instabil- ity develops. Gradually move the adjustment counterclock- wise until stability returns. Move the adjustment one division further to insure stable performance. C.Gain and stability adjustments may require minor changes after engine load is applied. Normally, adjustments made at no load achieve satisfactory performance. A strip chart recorder can be used to further optimize the adjustments. If instability cannot be corrected or further performance im- provements are required, refer to the section on SYSTEM TROUBLESHOOTING. Starting Fuel Adjustment The engine’s exhaust smoke at start-up can be minimized by completing the following adjustments. 1.Place the engine in idle by connecting Terminals M & G. 2.Adjust the IDLE speed for as low a speed setting as the application allows. 3.Adjust the STARTING FUEL CCW until the engine speed Idle Speed Setting If the IDLE speed setting was not adjusted as detailed in “Starting Fuel Adjustment” section, then place the optional external selector switch in the IDLE position. The idle speed set point is increased by clockwise rotation of the IDLE adjustment control. When the engine is at idle speed, the speed control unit applies droop to the governor system to insure stable operation. Speed Droop Operation Droop is typically used for the paralleling of engine driven generators.
Terminal Sensitivity --J
100 Hz., 15 Hz / Volt @ 5.0 K Impedance
Terminal Sensitivity --L
735 Hz., 60 Hz / Volt @ 65 K Impedance
Terminal Sensitivity --N
148 Hz., 10 Hz / Volt @ 1 Meg. Impedance
Terminal Sensitivity --P
10 VDC Supply @ 20 ma Max.
Ambient Operating Temperature Range
-40˚ to +180˚F (-40˚ to +85˚C)
12 or 24 VDC Battery Systems
Actuator Current Range @ 77 F (25 C) -
(Inductive Load
Min. 2.5 Amps Max. 10 Amps continuous
Speed Sensor Signal
0.5–120 Volts RMS
Vibration 1G @ 20–100 Hz
Testing 100% Functionally Tested
Detail Images
Packing & Delivery
Packing Details : Packaging individual packing and standard export carton. Delivery Details : reach most of the countries within 3 to 10 business days.
Shock bubble film: The inner wall of each carton is cushioned with anti-impact foam to ensure that the product will not be damaged due to transportation
Suitable carton size: We will choose the right size box according to the weight of the product. Too Much Weight / too little weight per case is not good for product protection and freight savings for customers.
Box packing requirements: In order to avoid damage to the boxes in transit, each box has packing tape. Cases shipped by sea have waterproof film on the outside.Marks should be pasted according to clients’s requirement.
Company Profile
Dongguan Feirui Electronics Co., Ltd. is located in Donguan City, which is known as "the World's Factory" in China. We are engaged in developing and producing engine parts including starting controllers, speed control units, automatic voltage regulators (AVR), synchronizers, load share modules, and other correlative generator accessories, such as chargers, sensors, actuators and other related products. We have emulational system which is the most advanced in the same industry. The system can imitate the whole process of real generator. Therefore, we can control our quality with the precise testing equipment. On the other hand, we own some generator experts with rich experience in electromechanical automatic control system. Being good at soft ware & hard ware, these experts are trained by some well-known diesel engine factories. With about 10 years' experience and skill, we can supply the best technology support service. According to customers' requirements, we can develop some special products and supply OEM service. Due to our unremitting efforts for many years, we have set up wholesalers in Nigeria, Egypt, Thailand and Philippines. Following the ideal of "Quality First, Credit and Service is Our Belief ", we strive for innovation to make satisfied generator parts. We expect to create more achievement tomorrow and welcome you to contact us for cooperation.
PCBA Automatic Optical Inspection Equipment:
ALD-620 type automatic optical inspection equipment, referred to as AOI, is based on the principles of optics, image comparison theory, statistical modeling principles of smart devices to detect welding defects on common problems encountered. AOI technology to detect the most representative of the three functions: fault, leakage, anti.
1. After the solder paste printing: printing process can be found in the defect, which will produce bad because the solder paste printing welding defects to a minimum.
2. reflow ago: most defects can be found from the solder paste printing and placement of the machine. 3. Reflow: bad ownership process can be detected at this stage, so there is no defect flows final customer.

Sealing machine

In order to improve production efficiency, the company adopts advanced glue injection machine, and the glue surface of products sprayed by the machine is more beautiful and even.

In addition, it perfectly solves the problem that the glue is not easy to dry in rainy weather, reduces the waiting time of customers, and can meet the urgent order needs of customers.
Simulation Test Platform:
Quality Department simulation test platform, Simulate and test the electrical functions of the electronic products in the operation of the generator, whether there are effective, reliable and stable performance
Goods Final Test Room:
It simulating generator load works for 12 hours continuely,to test products' Electrical Property if reliable and stable , after continuous work in high temperature. (According to Aging Test of electronic components probable failure course of various reasons,unqualified items and early-failures will be filtered).
Our company takes part in Shanghai power exhibition every year. This well-known professional exhibition enables us to establish a happy relationship with customers from all over the world. Our products are exported to 30 countries and areas such as Southeast Asia, the Middle East and Africa, highly recommended by domestic and foreign customers.


In the picture, Our customers are very interested in our remote monitoring system. No matter anywhere in the world, as long as
there is the network, you can use mobile phones or computers to monitor the operation data of the generator set, control and
manage the generator set remotely. In addition to monitoring the basic information of the unit, it can also monitor the excitation
voltage, the output voltage of the electric regulation, the bearing temperature, the winding temperature, etc.

LIXiSE controllers

Customers highly appraise the company's advanced technology research and development ability, perfect production process and
advanced testing equipment. More importantly, the products are simple to operate and have complete functions, which attract
customers to place orders and purchase on site.
Customers come to visit the factory
Our Cervice


All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email or give us a call any time.

High quality

We always adhere to the refined and specialized production. management.Based on the 13 years technology accumulation,obtains many national patents.


Guarantee:365 days after selled. During guarantee,the items share free repairs or replacement. 
Q: Are you trading company or manufacturer ? A: We are factory. Q: How long is your delivery time? 1.Generally it is 2-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. Q: What is your terms of payment ? 1.We accept alibaba order online, Alipay, West Union, TT. Cash.  2.All major Credit cards are accepted through secure payment processor ESCROW., or
Potrebbe interessarti
Non è proprio quello che cerchi? 1 richiesta, più preventivi Ottieni i preventivi ora >>
Questi risultati di prodotti o fornitori sono stati tradotti automaticamente per tua praticità tramite uno strumento di traduzione linguistica. Se riscontri problemi con i risultati della traduzione, apprezziamo i tuoi suggerimenti.
Tutte le informazioni sul prodotto e sul fornitore nelle lingue diverse dall'inglese visualizzate in questa pagina di sono tradotte automaticamente dallo strumento di traduzione linguistica. Se hai domande o suggerimenti sulla qualità della traduzione automatica, ti invitiamo a inviarci un'e-mail all'indirizzo La traduzione è un processo puramente automatizzato, completato tramite mezzi tecnici. non ha partecipato ad alcuna traduzione, né conosce o controlla la traduzione o il contenuto delle offerte. e le sue consociate, inoltre, negano espressamente qualsiasi garanzia, espressa o implicita, e responsabilità per qualsiasi perdita derivante da o correlata ad eventuali informazioni tradotte in automatico o causata da errori tecnici dello strumento di traduzione linguistica.